We only sell authentic products from verified brand partners and retail partners globally.
Skeleton text
Skeleton text
Skeleton text
Skeleton text
Skeleton text
Skeleton text
Skeleton text
Bandai
GUNPLA ACTION BASE 1 WHITE
S$8.90
S$11.95
-26%
Bandai® Display Accessories
GUNPLA ACTION BASE 1 WHITE
GUNPLA ACTION BASE 1 WHITE
This action base 1 in white color designed to hold kits from their SD Gundam, 1/144 scale models, HGUC, HG Gundam Seed, 1/100 scale models, MG, and Real Robot Revolution series. No other display bases from other companies come close what this amazing display base allows you to do!
Action Base 1 is a plastic injection snap-fit assembly kit that requires very little work to assemble. No cement or paint required! The octagon base and the square part that can be connected to any one of its sides come with cool mechanical detailing and panel lines, plus a total of 10 holes for placing the support pole for the main stand to adjust the main stand's height. The support pole has an ingenious locking mechanism that allows it to extend or retract and is strong enough to hold the main stand in place. The main stand itself can also be extended upwards to pose your kit in a much higher position.
The set comes with three different sizes (8mm, 9mm, and 11mm) of U-shaped holders, peg-type holders, and screw-on type holders (two screws and a nut are included) for attaching the main stand to the base of the kit. When using the U-shaped or screw-on holders, double-sided tape (small quantity included) should be applied in between the crotch of the kit and the holders to hold it in place. A name plate is included that can be attached to any one of the holes on the base. (The package notes that there may be cases of a kit not able to fit.)
Action Base 1 is a plastic injection snap-fit assembly kit that requires very little work to assemble. No cement or paint required! The octagon base and the square part that can be connected to any one of its sides come with cool mechanical detailing and panel lines, plus a total of 10 holes for placing the support pole for the main stand to adjust the main stand's height. The support pole has an ingenious locking mechanism that allows it to extend or retract and is strong enough to hold the main stand in place. The main stand itself can also be extended upwards to pose your kit in a much higher position.
The set comes with three different sizes (8mm, 9mm, and 11mm) of U-shaped holders, peg-type holders, and screw-on type holders (two screws and a nut are included) for attaching the main stand to the base of the kit. When using the U-shaped or screw-on holders, double-sided tape (small quantity included) should be applied in between the crotch of the kit and the holders to hold it in place. A name plate is included that can be attached to any one of the holes on the base. (The package notes that there may be cases of a kit not able to fit.)
⚠️ CONTAIN SMALL PARTS! KEEP OUT OF REACH OF CHILDREN UNDER 8 YEARS OLD! This is Bandai highly detailed plastic model kit display stand for your Gundam Gundam plastic models. No glue or paint necessary. Official product visuals shown are provided by Bandai which may be painted and clear coated. Plastic model(s) shown displaying with the action base are sold separately. Final product may be slightly different upon completion.
PACKAGE : 24cm x 20cm x 5cm - 130g
PACKAGE : 24cm x 20cm x 5cm - 130g
Choose your Location
-
VCA GUNDAM SINGAPORE
Free
Usually ready for pickup in 24 hours
140 Paya Lebar Road AZ@Paya Lebar #03-05 Singapore 409015
+65 8243 4766
Store hours
Mon - Fri, 12pm - 7pm
Sat & Sun, 12pm - 6pm
Store locator
Bandai
GUNPLA ACTION BASE 1 WHITE
SKU: 4573102592569
S$8.90
S$11.95
-26%
Out of stock
GUNPLA ACTION BASE 1 WHITE
S$8.90
S$11.95
S$8.90
S$11.95
Bandai® Display Accessories
GUNPLA ACTION BASE 1 WHITE
GUNPLA ACTION BASE 1 WHITE
This action base 1 in white color designed to hold kits from their SD Gundam, 1/144 scale models, HGUC, HG Gundam Seed, 1/100 scale models, MG, and Real Robot Revolution series. No other display bases from other companies come close what this amazing display base allows you to do!
Action Base 1 is a plastic injection snap-fit assembly kit that requires very little work to assemble. No cement or paint required! The octagon base and the square part that can be connected to any one of its sides come with cool mechanical detailing and panel lines, plus a total of 10 holes for placing the support pole for the main stand to adjust the main stand's height. The support pole has an ingenious locking mechanism that allows it to extend or retract and is strong enough to hold the main stand in place. The main stand itself can also be extended upwards to pose your kit in a much higher position.
The set comes with three different sizes (8mm, 9mm, and 11mm) of U-shaped holders, peg-type holders, and screw-on type holders (two screws and a nut are included) for attaching the main stand to the base of the kit. When using the U-shaped or screw-on holders, double-sided tape (small quantity included) should be applied in between the crotch of the kit and the holders to hold it in place. A name plate is included that can be attached to any one of the holes on the base. (The package notes that there may be cases of a kit not able to fit.)
Action Base 1 is a plastic injection snap-fit assembly kit that requires very little work to assemble. No cement or paint required! The octagon base and the square part that can be connected to any one of its sides come with cool mechanical detailing and panel lines, plus a total of 10 holes for placing the support pole for the main stand to adjust the main stand's height. The support pole has an ingenious locking mechanism that allows it to extend or retract and is strong enough to hold the main stand in place. The main stand itself can also be extended upwards to pose your kit in a much higher position.
The set comes with three different sizes (8mm, 9mm, and 11mm) of U-shaped holders, peg-type holders, and screw-on type holders (two screws and a nut are included) for attaching the main stand to the base of the kit. When using the U-shaped or screw-on holders, double-sided tape (small quantity included) should be applied in between the crotch of the kit and the holders to hold it in place. A name plate is included that can be attached to any one of the holes on the base. (The package notes that there may be cases of a kit not able to fit.)
⚠️ CONTAIN SMALL PARTS! KEEP OUT OF REACH OF CHILDREN UNDER 8 YEARS OLD! This is Bandai highly detailed plastic model kit display stand for your Gundam Gundam plastic models. No glue or paint necessary. Official product visuals shown are provided by Bandai which may be painted and clear coated. Plastic model(s) shown displaying with the action base are sold separately. Final product may be slightly different upon completion.
PACKAGE : 24cm x 20cm x 5cm - 130g
PACKAGE : 24cm x 20cm x 5cm - 130g
Authencity Guaranteed
Bandai
S$23.80
S$40.95
Recently viewed products
- Choosing a selection results in a full page refresh.
- Opens in a new window.