-
零件分离器
Bandai Namco 爱好收纳系列 零件分离器 Bandai Spirits 官方零件分离器就在这里 - 初学者和老手都必须拥有的工具!该设备利用 plamo 制造商的专业知识,非常适合拆卸模型套件而不会损坏零件。它有助于分离普通零件和聚电容器设计。现在下单! ⚠️这是专门为塑料模型拼装套件制作的工具。请格外小心地处理所有应用工具。显示的官方产品视觉效果由官方提供,完成后可能会略有不同。不包括演示视觉效果中显示的塑料模型/动作人物。 制造商: 万代南梦宫 发布日期: 2022 年 5 月 产品类别 应用 序列号/JAN 代码: 4573102637031 包装: 16×6×0.3厘米/10克 VCA 高达 新加坡- $4.90 SGD
$3.46 SGD- $4.90 SGD
- Unit price
- per
-
BANDAI SPIRITS 入口钳(蓝色)
Bandai® 烈酒爱好工具入口钳(蓝色) Bandai 推出了最新的模型构建必备工具,Entry Nipper(蓝色)!这些基本的钳子易于使用,非常适合那些刚刚开始构建模型套件和高达模型的人。 ⚠️请放置在 8 岁以下儿童接触不到的地方!这款爱好工具专为万代塑料模型套件组装而设计。它是锋利的切割工具,小心处理。请始终放在儿童接触不到的地方。包装:18 x 7 x 2cm - 50g- $10.90 SGD
$14.95 SGD- $10.90 SGD
- Unit price
- per
-
MS077 ROUND/TRIANGLE COTTON BUD SWAB
MS077 ROUND/TRIANGLE COTTON BUD It contains 100 units in a box. Each unit is two-type heads, round and triangle. Can use to remove excess water while applying water decal and also can use to remove excess panel line accent. Good tool to create weathering effect. The round...- $2.90 SGD
$3.49 SGD- $2.90 SGD
- Unit price
- per
-
入门工具套装
Bandai Spirits 官方工具 入门工具套装 这款超棒的工具套装结合了一套钳子、镊子和零件分离器,使其成为任何建模新手的理想入门套装!钳子经过专门设计,使用起来舒适;镊子非常适合整齐地粘贴贴纸,而零件分离器对于分离错误组装在一起的零件特别方便(我们都曾经历过)。镊子和零件分离器由树脂制成,因此不会损坏贴纸、贴花和零件。今天就订购吧! ⚠️这是专门为塑料模型拼装套件制作的工具。请格外小心地处理所有应用工具。显示的官方产品视觉效果由官方提供,完成后可能会略有不同。不包括演示视觉效果中显示的塑料模型/动作人物。 制造商: 万代南梦宫 发布日期: 2023 年 1 月 产品类别 应用 序列号/JAN 代码: 4573102620057 包装: 17.8 x 10 x 1.5 厘米/60 克 VCA 高达 新加坡- $19.90 SGD
$23.95 SGD- $19.90 SGD
- Unit price
- per
-
模型打磨棒套装(迷你)
Bandai Spirits 官方工具 模型迷你打磨棒套装 这套迷你棒锉刀可为您提供不同程度的粗糙度,而且尺寸方便,可让您平滑模型套件上最小的区域!它们适度的灵活性使它们具有难以置信的多功能性,您可以获得三种类型的粗糙度:#400、#600 和 #1000,以满足您的所有建模需求。您将获得三种类型各三个文件,总共九个文件。立即订购! ⚠️这是专门为塑料模型拼装套件制作的工具。请格外小心地处理所有应用工具。显示的官方产品视觉效果由官方提供,完成后可能会略有不同。不包括演示视觉效果中显示的塑料模型/动作人物。 制造商: 万代南梦宫 发布日期: 2022 年 3 月 产品类别 精加工 序列号/JAN 代码: 4573102620040 包装: 13.5 x 5 x 1.2 厘米/20 克 \ VCA 高达 新加坡- $7.90 SGD
$10.95 SGD- $7.90 SGD
- Unit price
- per
-
BANDAI SPIRITS 入口钳(白色)
Bandai® 烈酒爱好工具入口钳(白色) Bandai 推出了最新的模型构建必备工具,Entry Nipper(白色)!这些基本的钳子易于使用,非常适合那些刚刚开始构建模型套件和高达模型的人。 ⚠️请放置在 8 岁以下儿童接触不到的地方!这款爱好工具专为万代塑料模型套件组装而设计。它是锋利的切割工具,小心处理。请始终放在儿童接触不到的地方。包装:18 x 7 x 2cm - 50g- $10.90 SGD
$14.95 SGD- $10.90 SGD
- Unit price
- per
-
BANDAI BUILD UP 剪子
Bandai Spirits 官方工具 建立钳子 这款新型全能钳是 Bandai Spirits 与其他两家工具制造公司的联合项目,采用金刚石抛光高碳钢和带有凹槽和凸块的特殊新型握把,以防止打滑,并在工作时提供舒适的感觉。设计和结构中融入了拇指托,可防止钳子张开过大。 ⚠️这是专门为塑料模型拼装套件制作的工具。请格外小心地处理所有应用工具。显示的官方产品视觉效果由官方提供,完成后可能会略有不同。不包括演示视觉效果中显示的塑料模型/动作人物。 制造商: 万代南梦宫 发布日期: 2019年9月 产品类别 切割 序列号/JAN 代码: 4573102642103 包装: 19 x 8 x 1.4 厘米/70 克 VCA 高达 新加坡- $28.90 SGD
$33.95 SGD- $28.90 SGD
- Unit price
- per
-
BANDAI SPIRITS 入口钳(红色)
Bandai® 烈酒爱好工具入口钳(红色) Bandai 推出了最新的模型构建必备工具,Entry Nipper(红色)!这些基本的钳子易于使用,非常适合那些刚刚开始构建模型套件和高达模型的人。 ⚠️请放置在 8 岁以下儿童接触不到的地方!这款爱好工具专为万代塑料模型套件组装而设计。它是锋利的切割工具,小心处理。请始终放在儿童接触不到的地方。包装:18 x 7 x 2cm - 50g- $10.90 SGD
$14.95 SGD- $10.90 SGD
- Unit price
- per
-
模型打磨棒套装
Bandai Spirits 官方工具 模型打磨棒套装 这套棒锉为您提供不同程度的粗糙度,加上方便的尺寸,让您可以平滑模型套件上的大面积!它们适度的灵活性使它们具有难以置信的多功能性,您可以获得三种类型的粗糙度:#400、#600 和 #1000,以满足您的所有建模需求。您将获得三种类型各一个文件,总共三个文件。立即订购! ⚠️这是专门为塑料模型拼装套件制作的工具。请格外小心地处理所有应用工具。显示的官方产品视觉效果由官方提供,完成后可能会略有不同。不包括演示视觉效果中显示的塑料模型/动作人物。 制造商: 万代南梦宫 发布日期: 2022 年 3 月 产品类别 精加工 序列号/JAN 代码: 4573102620033 包装: 18 x 4 x 1.3 厘米/10 克 \ VCA 高达 新加坡- $7.90 SGD
$10.95 SGD- $7.90 SGD
- Unit price
- per
-
GLASS FILE 3 TYPE SET MS054
MS054 GLASS FILE 3 TYPE SET The MS-054 Glass Files is a premium tool designed for precision sanding and finishing in the construction of model kits. Engineered with a durable glass core, this file offers a fine, smooth abrasive surface ideal for removing sprue...- $14.90 SGD
$18.90 SGD- $14.90 SGD
- Unit price
- per
-
HOBBYCA HCC-100 高光泽造型刷 3 件套
Hobbyca® 工艺和爱好工具 HCC-100 高级造型刷 3 件套 这款方便的套装包括塑料模型精加工中常用的三把刷子。高光洁度刷具有专门设计的树脂刷毛,可与塑料模型涂料一起使用。包括No.2(6毫米宽)和No.0(4毫米宽)平刷,以及超细尖头刷。 ⚠️请放置在 8 岁以下儿童接触不到的地方!该工具配件专为塑料建模工作而设计。它有锋利的点/尖端,必须始终小心处理。请始终放在儿童接触不到的地方。 包装:24 x 3.6 x 0.6 厘米 - 9 克- $4.90 SGD
$5.90 SGD- $4.90 SGD
- Unit price
- per
-
MS068 WATER DECAL TRANSFER TOOL BOX WITH TWEEZER
MS068 WATER DECAL TRANSFER TOOL BOX WITH TWEEZER MS068 Water Decal Transfer Tool Box is a comprehensive kit designed for precision work, especially useful in model-making, nail art, and other delicate applications involving water decal transfers. The set includes high-quality stainless steel tweezers for...- $9.90 SGD
$12.90 SGD- $9.90 SGD
- Unit price
- per
-
BANDAI SPIRITS 入口镊子(灰色)
Bandai® 烈酒爱好工具入口钳(灰色) Bandai 推出了最新的模型构建必备工具,Entry Nipper(灰色)!这些基本的钳子易于使用,非常适合那些刚刚开始构建模型套件和高达模型的人。 ⚠️请放置在 8 岁以下儿童接触不到的地方!这款爱好工具专为万代塑料模型套件组装而设计。它是锋利的切割工具,小心处理。请始终放在儿童接触不到的地方。包装:18 x 7 x 2cm - 50g- $10.90 SGD
$14.95 SGD- $10.90 SGD
- Unit price
- per
-
HOBBYCA HCC-103 HI FINISH 造型刷 ULTRA FINE NO 00
Hobbyca® 工艺和爱好工具HCC-103 高级造型刷 超细 NO 00 高光洁度 (HF) 刷子采用专门设计的树脂刷毛,适用于塑料模型涂料。这种超细刷毛具有坚硬、均匀排列的刷毛,可进行非常精确的涂漆工作。 ⚠️请放置在 8 岁以下儿童接触不到的地方!该工具配件专为塑料建模工作而设计。它有锋利的点/尖端,必须始终小心处理。请始终放在儿童接触不到的地方。 包装:24 x 3.6 x 0.6 厘米 - 4G- $1.90 SGD
$2.50 SGD- $1.90 SGD
- Unit price
- per
-
GLASS FILE ROUND TIP TYPE MS054
MS054 GLASS FILE ROUND TYPE The MS-054 Glass Files is a premium tool designed for precision sanding and finishing in the construction of model kits. Engineered with a durable glass core, this file offers a fine, smooth abrasive surface ideal for removing sprue marks,...- $5.90 SGD
$6.20 SGD- $5.90 SGD
- Unit price
- per
-
GLASS FILE SQUARE TIP TYPE MS054
MS054 GLASS FILE SQUARE TYPE The MS-054 Glass Files is a premium tool designed for precision sanding and finishing in the construction of model kits. Engineered with a durable glass core, this file offers a fine, smooth abrasive surface ideal for removing sprue marks,...- $5.90 SGD
$6.20 SGD- $5.90 SGD
- Unit price
- per
-
BANDAI SPIRITS ENTRY NIPPER (PINK)
Bandai® Spirits Hobby ToolsENTRY NIPPER ( PINK ) Bandai debuts their newest essential tool for model building, the Entry Nipper (Blue) ! These basic nippers are easy to use, and perfect for those who are just getting into building model kits and Gunpla. ⚠️ KEEP...- $10.90 SGD
$14.95 SGD- $10.90 SGD
- Unit price
- per
-
田宫模型清洁刷(防静电)
尘埃散去!这款模型清洁刷经过专门设计,可帮助您的展示模型保持清晰。其纤维不仅可以去除灰尘和碎屑,还能消除静电,防止灰尘积聚。主刷的长纤维可以轻松清洁精致部位周围,而迷你刷则可以帮助您清洁那些难以到达的区域。这款刷子不仅非常适合保持塑料模型的外观,还非常适合清洁其他家居用品。- $32.00 SGD
$32.00 SGD- $32.00 SGD
- Unit price
- per
-
TAMIYA 87057 P1000 FINISHING ABRASIVES SANDPAPER (3 PCS)
Sandpaper that can be used when modifying and finishing Tamiya products. For use on metal, plastic or wood. Can be used wet or dry and is clog-resistant.1000 Grit ★Sheet size: 93 x 227 mm- $3.90 SGD
$4.50 SGD- $3.90 SGD
- Unit price
- per
-
TAMIYA 87054 P400 FINISHING ABRASIVES SANDPAPER (3 PCS)
Sandpaper that can be used when modifying and finishing Tamiya products. For use on metal, plastic or wood. Can be used wet or dry and is clog-resistant.400 Grit ★Sheet size: 93 x 227 mm- $3.50 SGD
$4.00 SGD- $3.50 SGD
- Unit price
- per
-
油漆搅拌器(2个)
这款不锈钢工具专为搅拌瓶装涂料以及混合不同色调而设计。一端形状像一把小勺子,另一端则扁平,像一把抹刀。工具长度为15cm。包括两个搅拌器。- $8.00 SGD
- $8.00 SGD
- Unit price
- per
-
TAMIYA 87056 P800 FINISHING ABRASIVES SANDPAPER (3 PCS)
Sandpaper that can be used when modifying and finishing Tamiya products. For use on metal, plastic or wood. Can be used wet or dry and is clog-resistant.800 Grit ★Sheet size: 93 x 227 mm- $3.50 SGD
$4.00 SGD- $3.50 SGD
- Unit price
- per
-
TAMIYA 87060 P2000 FINISHING ABRASIVES SANDPAPER (3 PCS)
Sandpaper that can be used when modifying and finishing Tamiya products. For use on metal, plastic or wood. Can be used wet or dry and is clog-resistant.2000 Grit ★Sheet size: 93 x 227 mm- $4.50 SGD
$5.00 SGD- $4.50 SGD
- Unit price
- per
-
TAMIYA 87058 P1200 FINISHING ABRASIVES SANDPAPER (3 PCS)
Sandpaper that can be used when modifying and finishing Tamiya products. For use on metal, plastic or wood. Can be used wet or dry and is clog-resistant.1200 Grit ★Sheet size: 93 x 227 mm- $4.50 SGD
$5.00 SGD- $4.50 SGD
- Unit price
- per
-
TAMIYA 87035 MASKING TAPE REFILL 18mm
Tamiya Masking Tape is thin, very strong adhesive tape for your gundam gunpla modeling use. It even adheres well to uneven surfaces. It's ideal when sharp and crisp lines are required. This tape will not absorb paint color, or leave unsightly marks, making it...- $7.50 SGD
$11.50 SGD- $7.50 SGD
- Unit price
- per
-
TAMIYA 87094 P320 FINISHING ABRASIVES SANDPAPER (3 PCS)
This versatile abrasive paper has a variety of uses, from shape plastic and metal model components to adding a finish to wood. Its design ensures minimal clogging in the grit, while consistent particle size reduces the risk of damage to the target surface. A...- $3.50 SGD
$3.50 SGD- $3.50 SGD
- Unit price
- per
-
TAMIYA 87059 P1500 FINISHING ABRASIVES SANDPAPER (3 PCS)
Sandpaper that can be used when modifying and finishing Tamiya products. For use on metal, plastic or wood. Can be used wet or dry and is clog-resistant.1500 Grit ★Sheet size: 93 x 227 mm- $4.50 SGD
$5.00 SGD- $4.50 SGD
- Unit price
- per
-
TAMIYA 87092 P180 FINISHING ABRASIVES SANDPAPER (3 PCS)
This versatile abrasive paper has a variety of uses, from shape plastic and metal model components to adding a finish to wood. Its design ensures minimal clogging in the grit, while consistent particle size reduces the risk of damage to the target surface. A...- $2.90 SGD
$2.90 SGD- $2.90 SGD
- Unit price
- per
-
田宫设计替换刀片(30 件)
Tamiya 74020 设计刀的 30 个替换刀片装在一个塑料容器中。及时更换磨损的刀片,以确保您的设计刀提供理想的性能。- $7.00 SGD
- $7.00 SGD
- Unit price
- per
-
TAMIYA 74031 DECAL SCISSORS
These Tamiya Decal Scissors are made of high-quality carbon steel and are perfect for cutting decals, found inside Tamiya plastic model kits. The sharp carbon steel and fine point makes it easy for trimming the most intricate of decal designs. The stainless-steel blades have...- $26.90 SGD
$30.00 SGD- $26.90 SGD
- Unit price
- per
-
TAMIYA 74056 CUTTING MAT A4/BEIGE
This cutting mat uses 3 layers of material for a gentle touch that protects the blade of your craft knife while keeping cut marks in its surface to a minimum. Use it when cutting materials such as Tamiya pla-plate, decals and masking tape.Cutting mat...- $19.00 SGD
$22.00 SGD- $19.00 SGD
- Unit price
- per
-
TAMIYA 74024 THIN BLADE CRAFT SAW
This handy razor saw is ideal for cutting plastic and wood, during modeling and craft works. The extremely thin blade is made of high quality steel, enabling sharp finish. Blade length is 160mm, and width is 40mm. Comes with a spare blade. ⚠️ KEEP OUT...- $25.50 SGD
$25.50 SGD- $25.50 SGD
- Unit price
- per
-
TAMIYA 74005 CURVED SCISSORS
The curved blades on these scissors give a smooth and well-formed curved cut, perfect for use on subjects such as polycarbonate R/C car bodies. Not only that, cutting using the deepest part of the jaw gives a straight cut.- $19.90 SGD
$19.90 SGD- $19.90 SGD
- Unit price
- per
-
TAMIYA 87093 P240 FINISHING ABRASIVES SANDPAPER (3 PCS)
This versatile abrasive paper has a variety of uses, from shape plastic and metal model components to adding a finish to wood. Its design ensures minimal clogging in the grit, while consistent particle size reduces the risk of damage to the target surface. A...- $3.50 SGD
$3.50 SGD- $3.50 SGD
- Unit price
- per
-
TAMIYA 74144 CUTTING MAT (A3 HALF SIZE / BLUE)
This compact cutting board is made of semi-transparent blue resin with minimal odor. Its 3-ply composition features an internal hard layer sandwiched by softer outer layers, increasing knife blade longevity. The 145mm x 450mm surface area has front printed grid, increment angles, standard and...- $22.00 SGD
$25.00 SGD- $22.00 SGD
- Unit price
- per
-
TAMIYA 74003 ANGLED TWEEZERS
★These tweezers feature a finely-angled tip that gives you access to hard-to-reach places, while of course the meet of the two points is spot-on. The result is hassle-free attachment of all parts, whether fiddly or otherwise.- $19.50 SGD
$22.99 SGD- $19.50 SGD
- Unit price
- per
-
TAMIYA 87063 40mm MASKING TAPE
Tamiya Masking Tape 40mm a high-quality masking tool designed specifically for modeling applications. It is widely used by hobbyists to achieve sharp, clean paint lines and protect large surface areas during airbrushing or spray painting. Key Specification Width: 40mm. Length: 18m per roll. Material: Thin, flexible Japanese...- $8.50 SGD
$12.99 SGD- $8.50 SGD
- Unit price
- per
-
TAMIYA 74077 PAINT JAR STAND
This is a rotating two-tier paint jar stand that lets you organize your paints clearly for easy access. It can store up to 7 jars of acrylic "mini" (10 ml) or 6 jars of 23 ml paints per tray. Each tray has a small...- $35.00 SGD
- $35.00 SGD
- Unit price
- per
-
TAMIYA 87055 P600 FINISHING ABRASIVES SANDPAPER (3 PCS)
Sandpaper that can be used when modifying and finishing Tamiya products. For use on metal, plastic or wood. Can be used wet or dry and is clog-resistant.600 Grit ★Sheet size: 93 x 227 mm- $3.90 SGD
$7.99 SGD- $3.90 SGD
- Unit price
- per













































